Sodium hydroxide (NaOH), also known as lye and caustic soda iran is an inorganic compound.
It is a white solid and highly caustic metallic base and alkali salt which is available in pellets, flakes, granules, and as prepared solutions at a number of different concentrations.
Sodium hydroxide forms an approximately 50% (by weight) saturated solution with water.
Sodium hydroxide is soluble in water, ethanol and methanol. This alkali is deliquescent and readily absorbs moisture and carbon dioxide in air.
Sodium hydroxide is used in many industries, mostly as a strong chemical base in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner.
Worldwide production in 2004 was approximately 60 million tonnes, while demand was 51 million tonnes.
Pure sodium hydroxide is a whitish solid, sold in pellets, flakes, and granular form, as well as in solution.
It is highly soluble in water, with a lower solubility in ethanol and methanol, but is insoluble in ether and other non-polar solvents.
Similar to the hydration of sulfuric acid, dissolution of solid sodium hydroxide in water is a highly exothermic reaction in which a large amount of heat is liberated, posing a threat to safety through the possibility of splashing.
The resulting solution is usually colorless and odorless with slippery feeling upon contact in common with other alkalis.
Sodium hydroxide is industrially produced as a 50% solution by variations of the electrolytic chloralkali process.
Chlorine gas is also produced in this process. Solid sodium hydroxide is obtained from this solution by the evaporation of water. Solid sodium hydroxide is most commonly sold as flakes, prills, and cast blocks.
In 2004, world production was estimated at 60 million dry metric tonnes of sodium hydroxide, and demand was estimated at 51 million tonnes.
In 1998, total world production was around 45 million tonnes. North America and Asia collectively contributed around 14 million tonnes, while Europe produced around 10 million tonnes.
In the United States, the major producer of sodium hydroxide is the Dow Chemical Co
mpany, which has annual production around 3.7 million tonnes from sites at Free port, Texas, and Plaque mine, Louisiana. Other major US producers include Oxychem, PPG, Olin, Pioneer Companies, Inc. (PIANO, which was purchased by Olin), and Formosa. All of these companies use the chloral process.
Historically, sodium hydroxide was produced by treating sodium carbonate with calcium hydroxide in a metathesis reaction. (Sodium hydroxide is soluble while calcium carbonate is not.) This process was called causticizing.
Ca(OH)2(aq) + Na2CO3(s) → CaCO3 → + 2 NaOH(aq)
This process was superseded by the Solvay process in the late 19th century, which was in turn supplanted by the chloralkali process which we use today.
Sodium hydroxide is also produced by combining pure sodium metal with water.
The byproducts are hydrogen gas and heat, often resulting in a flame, making this a common demonstration of the reactivity of alkali metals in academic environments; however, it is not commercially viable, as the isolation of sodium metal is typically performed by reduction or electrolysis of sodium compounds including sodium hydroxide.