Caustic soda in leather manufacturing

Caustic soda in leather manufacturing

Caustic soda in leather manufacturing

Caustic soda in Leather Manufacturing: caustic soda as a highly reactive alkali
is widely used in various industries.
Caustic soda has a faster and stronger reactivity than other alkali materials.
The tannery or leather process makes the corrosive skin a stable,
permanent and flexible natural material for many applications.
This natural material is called “leather”, which has many uses.
Leather dressing or tanning has several stages during which the skin turns into
leather.

Souse and soaking

Chemicals used in the leather industry
At this stage, the skin will soda from salt.
Cold water is passed through the soda salt skin and the salt dissolves in water.
With this, the skin becomes aqueous.
In this process, some proteins in the skin are removed from the skin with blood
and other water-soluble proteins.
Exit of these proteins increases the quality of the skin.
At this stage, antibacterial agents (often chlorine compounds) are commonly used.
And, substances such as sodium sulfide (S2Na) or sodium
tetra sulfide (4 s2Na) can be used in water.
Until the root of the hair becomes loose.
then, water-soluble proteins are removed from the skin,
the skin returns to its natural state by absorbing water.
And it will be ready for the next steps.

Lime

At this stage, lime operations are performed on the skin.
By raising the pH of the blood, the roots of the hair are loose and help
remove excess proteins and fats.
By placing the skin in this environment, the keratin molecules of the hair are
broken down without skin collagen damage.

Desensitization

After the lime scale process, it is necessary to remove all unnecessary skin tissues.
At this stage, using a device called the muscle, meat and other extra tissue
remaining on the skin separated from it And cause the chemicals that
are used in the next steps to uniformly penetrate the skin.

Leather Lining and Curling

After decay, you must remove wool and hair and other proteins from the skin.
To do this, they put it in a solution of lime and add a little sodium sulfide.
It combines hair and hair wrapping.
In addition to sodium sulfide, other compounds such as methylamine,
sodium sulfide and sodium carbonate are also used;
These materials are used to facilitate the process of manipulation.

Remove lime

The remaining lime from the previous step must be completely removed
as it may cause the staining phase to be difficult.
For this purpose, chemicals used in the leather industry such as ammonium
salts, sodium bisulfite,Sulfuric acid.

Alkaline

The skin is eaten in an alkaline solution with ammonium salts,
which increases the effect of enzymes.
And the surface of the skin is smooth and clean.
Meanwhile, the flexibility of the skin also increases.

Fat removal

The skin of some animals is greasier and requires a separate step to remove fat.
At this stage, sodium hydroxide is usually used to convert fat to soap
and to wash it with water.

Leather coloring

For coloring leather, organic colored materials and inorganic colored
materials such as zinc oxide and lead chromite are used.

Leave a Reply

Your email address will not be published. Required fields are marked *